Manufacturer & Supplier of Agricultural Machineries
Harihar Agro Industries (HAI) manufactures vertical turbine pumps with the brand name of “Harihar Turbine Pumps” with German technology and under strict guidelines set by Standard Bureau of India, providing a complete range (50 feet to 400 feet) water lubricated pumps for Agricultural, Industrial, Municipal and Commercial applications. This pump can be run by Electric Motor or Diesel Engine.
HAI was established before two decades, has developed the “Harihar Turbine Pumps” utilizing latest machinery and equipment along with a dedicated team to produce the highest quality, performance and economical vertical turbine pumps.
Strict Quality Control is enforced at each stage of manufacturing to ensure a final product to the required specifications. All finished goods Pumps are inspected as per requirements of customer and also BIS standards are followed. All Pumps are tested in the test lab and all technical data are observed on the control panel and recorded to ensure best results and performance.
«
The bowl castings of Vertical Turbine Pumps are manufactured with robust close grained cast iron and an engineered vein design for maximum efficiency setting a high standard for quality, capability and durability and veined to guide water flow from one impeller to the next with maximum efficiency.
«
The enclosed impellers are cast from high-grade with flow passages hand finished to a smooth surface for minimum efficiency losses. All impellers are balanced statically and dynamically to avoid vibration and secured to the pump shaft with tapered lock collers.
«
pump shaft is made from high-grade tensile strength stainless steel sufficient to prevent distortion.
«
The Bowl assemblies have varied specified components such as heavy-duty sand collers, sand lugs, bowl bearings in bronze and rubber. All bowls have a maximum lateral to allow for deep setting conditions. To insure long life under severe conditions, both rubber and bronze bearings (dual bowl bearings system) are used.
«
The TATA Steel column pipe coupling has bronze centring spiders with fluted-rubber line shaft bearings designed for deep well water pumping requirements.
About Multiboard Plough
“Harihar Mould board Reversible Plough” can handle the toughest ploughing jobs and are ideally suited for to completely invert the soil, up-root all weeds, trash and crop residues and bury them under the soil.
Harihar Ploughs are available in 2 and 3 bottom versions depending on the Horse Power of the tractor to be used. Bar point bottom ensures longer life as it can be extended or reversed and re-used till the last possible length.
Features
»
Generous under beam and unit to unit clearance between the bodies prevents trash build up while working at high speeds.
»
Power is applied through Tractor lower hitch the rear heels for increased traction in heavy soils.
»
Mould boards are designed with adequate curvature for better scouring and complete soil inversion.
»
The frame is a rugged MS welded structure with sufficient rigidity to withstand heavy loads.
»
Plough Shears made of high carbon steel are manufactured by close - die forging and subsequent machining and heat treatment to provide properties of wear resistance and ability to stand impact loading.
»
Optional Adjustable depth control wheel is provided with screw adjustment for varying the depth of penetration.
»
Standard furrow width between two consecutive bottoms, but may be increased or decreased as per requirements.
Specification Chart
Type
Integral, reversible for use with tractor in-furrow available in 2 and 3 bottom sizes.
Width-of-cut
Manually adjustable from 16- to 18-in. (406 or 457 mm)
In-furrow hitch
Category 2, 3 Quik-Coupler compatibility
Type of reversing
Manually
Standards
Welded tubular steel
Type of protection
Tension-bolt (standard equipment) and safety-trip (optional)
